This enhanced range of 26 and 28 Volt portable GPUs has been
developed to provide DC power for aircraft starting. The units are
characterised by one of the best power-to-weight ratios on the
market.
Features
FW 26START-3000 and FW 28START-3000 - Fitted with five
high discharge batteries giving current of 3000 A for 30 Seconds
(6000 A peak)
The batteries will automatically recharge within 8 hours of
mains power being applied five independent 3-stage 10 Amp/hr
chargers
Digital voltmeter indicates voltage of the batteries when a push
button is pressed
LED indicates the charging stage of the batteries, RED (fast
charge), ORANGE (constant current charge), and GREEN
(trickle charge)
When mains input is applied.
Supplied with 3-meter heavy-duty DC output cable and rubber
Aircraft plug, AC input cord and workshop manual.
Options
Can be supplied with longer heavy-duty DC output cable and
rubber Aircraft plug
Can be connected in parallel with other FW GPUs to
increase current output or to be used for starting aircraft.
Technical Specifications *
Technical Data
FW 26START-3000
FW 28START-3000
FW 28START-6000
Input Voltage
90 VAC to 264 VAC
Input Voltage Frequency
40Hz to 70Hz
Output Voltage
27.9 VDC
30.1 VDC
Battery Charging Current
3 stage charger 10 Amp/Hr
Output Peak Current
3000A for 30 Seconds
(6000A peak)
3000A for 30 Seconds
(6000A peak)
3000A for 30 Seconds
(6000A peak)
Efficiency
90%
Overall Dimensions in mm (L x H x W)
800 x 350 x 500
800 x 550 x 500
Operating Temperature
-40°C to +70°C
Weight, not more than
100 Kg
105 Kg
200 Kg
Weather Resistance
IP 54
Safety Standards (Charger)
UL60950-1, CSA22.2, TUV EN60950-1
EMC Standards (Charger)
EN55014-1, EN61000-3-2,3, EN61000-4-2,3,4,5,6,11
Battery Standards
BS6290, IEC60896-21, SR - 4228, UL Standard 1989, NEBS Certified
Transportation Standards
Approved as non-hazardous cargo for ground, sea and air transportation
US DOT Regulation 49 and ICAO & IATA Packing Instruction 806
*
Technical specifications are subject to change, due to new developments. We also do custom development of products as per your requirements. The actual equipment may look different from the one shown in the photograph.