This unique range of 24 Volt portable GPUs has been developed
to provide DC power for aircraft starting. The units are characterised
by one of the best power-to- weight ratios on the market.
Features
FW START-1000 : Fitted with two high discharge batteries
giving current of 1000 A for 30 Second (2400 A peak).
FW START-2000 : Four high discharge batteries giving
current of 2000 A for 30 Second (4800 A peak).
The batteries will automatically recharge within 8 hours of
mains power being applied.
Two independent 3-stage 5 Amp/hr chargers.
Digital voltmeter indicates voltage of the batteries on a press
of push button.
LED indicates the charging stage of the batteries, RED (fast charge), ORANGE (constant current charge), and GREEN
(trickle charge) when mains input is applied.
Supplied with Three meter heavy-duty DC output cable and rubber Aircraft plug, AC input cord and workshop manual.
Options
Can be supplied with longer heavy-duty DC output cable and
rubber Aircraft plug.
Can be connected in parallel with other FW GPUs to
increase current output or to be used for starting aircraft.
Technical Specifications *
Technical Data
FW 24START-1000
FW 24START-2000
Input Voltage
90 VAC to 264 VAC
Input Voltage Frequency
40Hz to 70Hz
Output Voltage
25.8 VDC
Battery Charging Current
3 stage charger 5 Amp/Hr
Output Peak Current
1000A for 30 Seconds (2400A peak)
1000A for 30 Seconds (4800A peak)
Efficiency
90%
Overall Dimensions in mm (L x H x W)
290 x 320 x 300
440 x 320 x 300
Operating Temperature
-40°C to +70°C
Weight, not more than
30 Kg
58 Kg
Weather Resistance
IP 54
Safety Standards (Charger)
UL60950-1, CSA22.2, TUV EN60950-1
EMC Standards (Charger)
EN55014-1, EN61000-3-2,3, EN61000-4-2,3,4,5,6,11
Battery Standards
BS6290, IEC60896-21, SR – 4228, UL Standard 1989, NEBS Certified
Transportation Standards
Approved as non-hazardous cargo for ground, sea and air transportation
US DOT Regulation 49 and ICAO & IATA Packing Instruction 806
*
Technical specifications are subject to change, due to new developments. We also do custom development of products as per your requirements. The actual equipment may look different from the one shown in the photograph.
Features
